Use the services menu – HP LaserJet M1522 Multifunction Printer series User Manual
Page 46
Print on both sides of the page (duplex printing)
Print on both sides manually
1.
Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●
For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer first.
●
For all other trays, load the letterhead paper face-down with the top edge at the back of the
tray.
CAUTION:
To avoid jams, do not load paper that is heavier than 105 g/m
2
(28-lb bond).
2.
On the File menu, click Print.
3.
On the Finishing pop-up menu, select the Manual Duplex option.
4.
Click Print. Follow the instructions in the pop-up window that appears on the computer screen
before replacing the output stack in tray 1 for printing the second half.
5.
Go to the printer, and remove any blank paper that is in tray 1.
6.
Insert the printed stack face-up with the bottom edge feeding into the printer first in tray 1. You
must print the second side from tray 1.
7.
If prompted, press the appropriate control-panel button to continue.
Use the Services menu
If the device is connected to a network, use the Services menu to obtain device and supply-status
information.
1.
On the File menu, click Print.
2.
Open the Services menu.
3.
Select a maintenance task from the drop-down list, and then click Launch. The embedded Web
server opens to the page that provides the information for the task that you selected.
4.
To go to various support Web sites for this device, select an Internet Services option from the drop-
down list, and then click Go!.
34
Chapter 4 Use the product with Macintosh
ENWW