HP LaserJet M1522 Multifunction Printer series User Manual
Page 129
Dial manually with the automatic document feeder (ADF)
1.
Load the document into the automatic document feeder (ADF) input tray.
2.
On the control panel, press
Start Fax
.
3.
Begin dialing.
NOTE:
The product dials the number as you press each digit. This allows you to wait for pauses,
dial tones, international-access tones, or calling-card-acceptance tones before continuing to dial.
Dial manually with the flatbed scanner
1.
On the control panel, press
Start Fax
.
The control-panel display shows the following message: Send from glass? 1=Yes 2=No.
2.
Press
1
to select Yes. The control-panel display shows the following message: Load page: X
Press
OK
, where X is the page number.
3.
Scan a page into memory by placing the sheet print-side-down on the flatbed scanner and pressing
OK
. After scanning the page, the product control-panel display shows the following message:
Another page? 1=Yes 2=No.
4.
If you have more pages to scan, press
1
to select Yes, and then repeat step 3 for each page of the
fax job.
-or-
If you are finished, press
2
to select No, and then go to the next step.
5.
When all pages are scanned into memory, begin dialing. The product dials the number as you
press each digit. This allows you to wait for pauses, dial tones, international access tones, or calling
card acceptance tones before continuing to dial.
Send a fax to a group manually (ad hoc faxing)
Use the following instructions to send a fax to a group of recipients that has not been assigned a group-
dial entry:
1.
Load the document into the automatic document feeder (ADF) input tray or on the flatbed scanner.
2.
Use the alphanumeric buttons.
-or-
If the fax number that you are calling has been assigned a speed-dial entry, press
Phone Book
,
use the alphanumeric buttons to specify the speed-dial entry, and then press
OK
.
3.
Press
OK
.
4.
To continue dialing numbers, repeat steps 2 and 3.
-or-
If you are finished dialing numbers, go to the next step.
5.
Press
Start Fax
. If the pages that you want to send are in the ADF, then faxing begins automatically.
ENWW
Use fax 117