Pairsplit-r dialog box – HP XP P9500 Storage User Manual
Page 171
Description
Item
The serial number with the number of LDKC and the controller ID with the model name of the
secondary system. This option also allows you to specify the ID (Path Gr. ID) and path type
DKC
(channel type). The secondary system must be the same for all pairs being created during one
operation.
The options for starting the initial copy operation. The default is Entire.
Initial Copy
•
Entire: Initial copy starts after the pair is created. All data on the P-VOL is copied to the
S-VOL.
•
None: Initial copy does not start after the pair is created. P-VOL and S-VOL must be identical.
•
Delta: Initial copy does not start after the pair is created. The status of the pair changes to
HOLD or HOLDING (pair is intended for the delta resync).
The priority (scheduling order) of the initial copy operations (1-256). The default setting is 32.
Priority
For the details of the scheduling order of the initial copy for which the Priority is set, refer to
“Maximum initial copy operations and priorities” (page 24)
.
The range used for splitting a pair when a failure occurs. The default is Mirror.
Error Level
•
Mirror: If a failure occurs with a pair, all pairs in the mirror where the pair belongs are
split.
•
LU: If a failure occurs with a pair, only the pair are split.
The master journal information.
M-JNL Information
•
Current Mirror(s): Number of mirrors registered in the master journal.
•
Total Mirror(s): Sum of the following:
1. The number of mirrors registered in the master journal.
2. The number of mirrors to be added by the Paircreate dialog box.
3. The number of mirrors for volumes in the Preview list in the Pair Operation window.
Applies the settings to the Preview list in the Pair Operation window.
Set
Discards the settings and closes the dialog box.
Cancel
Pairsplit-r dialog box
Use this dialog box to split a pair.
See
for complete information.
Pair Operation window
171