HP XP P9500 Storage - Manual (Page 186)

•
If a pair consists of LUSE volumes, the list shows only the top LDEV numbers of the LUSE
volumes.
•
The copy time might not be shown in the Copy Time column, even though Paircreate Complete
or Pairresync Complete is shown in the Operation column. In such case, you can review the
copy time in the volume list in the Pair Operation window
Export operations history
Use the History window Export function to save operation history to a CSV file.
The following is an example of an exported text file.
2007/02/22 09:57:54,Paircreate Complete,01,01,00:02:01,00:02:04,--,000:01:08
2007/02/22 09:56:46,Paircreate Start,01,01,00:02:01,00:02:04,--,
2007/02/22 09:56:46,Pair
definition,01,01,00:02:01,00:02:04,--,
(1) (2) (3)(4)(5)(6)(7)(8)
(1) Data and time when the operation finished.
(2) Operation.
(3) Journal number
(4) Mirror ID
(5) LDKC number, CU number and LDEV number of the volume in the local system (LDKC : CU : LDEV).
(6) LDKC number, CU number and LDEV number of the volume in the remote system (LDKC : CU : LDEV).
(7) Extended consistency group number (used only with Cnt Ac-J Z). If no EXCTG, hyphens(--) display.
(8) Time taken for copying (from the start to the end of copying). Time is provided only when the operation (refer to
(2)) is Paircreate Complete or Pairresync Complete
Optional Operation window
In this window you change the number of volumes on which the initial copy operation is performed
concurrently.
See
“Specifying number of concurrent initial/resync copies” (page 49) for complete information.
186 GUI reference