HP XP P9500 Storage - Manual (Page 175)

Description Item
The internal volumes or external volumes. All shows both kinds. Internal/External
VOL
The Remote Web Console pair status or statuses. (RAID Manager statuses are not displayed.) Status
Restores all options to the defaults. Reset
Applies the settings to the Preview list in the Pair Operation window. Set
Discards the settings and closes the dialog box. Cancel
DKC Operation window
Use this window to view details about the remote systems, logical paths between systems, and
ports on the local system.
You can perform these procedures from the window:
•
“Configuring local and remote systems for Cnt Ac-J ” (page 45)
•
“Configuring additional logical paths ” (page 48)
•
View one of the following:
“Remote systems information ” (page 176) ◦
◦ “Logical Path Information” (page 177)
◦ “Port Information for the local system” (page 178)
NOTE: DKC is an acronym for disk controller, which controls an entire system. Cnt Ac-J windows
use the term "DKC" to indicate a system.
LDKC is an acronym for logical disk controller, and it also may be called logical DKC. LDKC is a
controller that controls a logical system that exists in P9500. In the Cnt Ac-J window, the term
“LDKC” indicates a logical system.
Information on the DKC Operation window is updated when you do one of the following:
•
Click File > Refresh on the menu bar.
•
Click Apply
•
Select another tab and then reselect the DKC Operation tab.
•
Close the DKC Status window.
•
Select Modify mode when you are in View mode.
DKC Operation window 175