Recovery using business copy s-vol – HP XP P9500 Storage User Manual
Page 51
Figure 10 Failure recovery workflow
The recovery procedures for RAID Manager and Remote Web Console are the same. See
“Supported RAID Manager commands” (page 33)
for details on RAID Manager commands.
Recovery using Business Copy S-VOL
You can recover the ESAM P-VOL from a Business Copy S-VOL located on the secondary system
(see
“Configurations with Business Copy volumes ” (page 20)
).
Procedure 33 To recover the primary system P-VOL from a Business Copy S-VOL:
1.
Swap and suspend the ESAM pair using the RAID Manager Pairsplit -RS command.
2.
Resynchronize the Business Copy pair on the secondary system in the reverse direction using
the Quick Restore or Reverse Copy operations. The data in the Business Copy S-VOL is copied
to the ESAM S-VOL.
3.
Split the Business Copy pair using the Pairsplit command.
4.
Resynchronize the ESAM pair in the reverse direction using the Pairresync -swaps command.
The data in the S-VOL is copied to the P-VOL.
Recovery from blocked P-VOL or S-VOL
51