HP XP P9500 Storage - Manual (Page 73)

Pairresync dialog box
Description Item
Port - GID – LUN (LDKC number: CU number: LDEV number) of the selected volume. The following
symbols might appear at the end of the LDEV number: P-VOL
•
# (e.g., 00:00:3C #): Indicates the volume is an external volume. For details on external
volumes, see HP P9000 External Storage for Open and Mainframe Systems User Guide.
• X (e.g., 00:00:3C X): Indicates the volume is a Thin Provisioning virtual volume. For details on
virtual volumes, see HP P9000 Provisioning for Open Systems User Guide.
Fence level is the condition that defines when the MCU rejects the write operations to the P-VOL.
Never appears, which means that the P-VOL will not be fenced from the write I/Os. P-VOL Fence Level
The number of the tracks 1-15 for the resync operation(s) (default = 15). Copy Pace
1
The desired priority (1-256) (scheduling order) for the resync operations (default = 32). Priority (see Note
below)
Required when a Continuous Access Synchronous Sync pair is resynchronized. Change attribute
to ESAM
•
Yes: Changes the Continuous Access Synchronous Sync pair to an ESAM pair.
• No: Resynchronizes the pair without changing the pair type.
To change a Continuous Access Synchronous Sync pair to an ESAM pair, specify a quorum disk
ID to be used by the ESAM pair. The list displays the quorum disk ID and the RCU information
such as the serial number, controller ID, and model name. Quorum Disk ID
Pair Operation window 73