HP XP P9500 Storage - Manual (Page 20)

Troubleshooting runtime CLI errors
If a results file indicates that a spreadsheet operation did not happen correctly, one of the following
conditions might have occurred:
•
A communication error.
•
Volumes or pairs do not have a status of “Ready” and are not ready to accept changes.
•
Another user is working with the storage system in RWC in Modify mode.
If you have an error, correct the condition and execute the command again.
The following table contains other CLI-related troubleshooting information.
Causes and Solutions Error Codes and Operations
•
The directory specified as the output file might not exist. Make sure
that the specified directory exists.
• You cannot write to the directory or file that is specified as the output
file. Make sure that you can write to the specified directory or file.
•
A correct version of Apache might not have been installed on the
SVP of the server. Contact the HP Technical Support Center.
For more information, see the HP P9000 Remote Web Console User
Guide.
Error (1310 69052)
The RMI timeout occurred because the RWC CLI processing was stopped.
Execute the RWC CLI command again. When a suspended RWC CLI process is
resumed, error (0001 4011) occurs.
Error (java.lang.NoClassDefFoundError) • You do not have the Java version that meets the operating condition
installed on the execution environment for the RWC CLI. Ensure that
you have the correct Java version installed.
For more information about the Java version, see HP P9000 Remote
Web Console User Guide.
• On the execution environment for the RWC CLI, you have not defined
an execution path to the correct Java version. Confirm the execution
path.
•
If you cannot solve the errors using the above solutions, contact the
HP Technical Support Center.
For more information, see the HP P9000 Remote Web Console User
Guide.
20 LUN Expansion operations