HP XP P9500 Storage - Manual (Page 31)

1. In RWC, select Actions > Other Functions > Configuration File Loader.
2. In the Configuration File Loader window, select the function tag you want to display from the
Select Tag list. The error information for that function tag is displayed in the Error Information
list.
Applying changes to CFL-based spreadsheets in LUN Manager
Use this procedure to apply the changes you made to the settings in the spreadsheet to the system.
You must import the spreadsheet without errors and the spreadsheet status must be “Ready” before
you can apply the changes.
All changes are applied except when one of the following conditions is present:
•
The current spreadsheet matches the imported spreadsheet. The spreadsheet is accepted, but
since you have made not changes to the spreadsheet, the spreadsheet is not applied to the
system.
•
The spreadsheet is needed to process I/O and you are attempting to delete it.
•
All the resource group IDs that are set to the storage system are not assigned to the user
account who logs in to RWC.
For more information about errors when applying changes in CFL-based spreadsheets, see “Errors
when importing CFL-based spreadsheets in LUN Manager” (page 30) .
1. In RWC, select Actions > Other Functions > Configuration File Loader.
2. Click Apply.
Errors when applying spreadsheets in LUN Manager
When you use CFL to apply the volume settings and an error occurs, the settings are applied
normally. If necessary, you can reset the volume settings where the error is displayed. You can
view the status of the spreadsheet in the bottom right of the Error Information list in CFL.
If the volumes where you apply the settings are valid for one of the following conditions, an error
message is displayed. Check the following settings or make changes to the configuration as
appropriate:
•
LDEVs that are not mapped to physical devices and are therefore undefined
•
Volume usable by open-systems (except multiplatform volumes)
•
Journal volumes
•
Compatible FlashCopy V2 volumes
•
System Disk volumes
•
LDEVs that are configured as command devices
•
The case of which the software application has not been installed (except when you change
the access attribute to Read/Write)
•
Volumes whose emulation types are 3390-V
•
Volumes that are comprised of a pool
•
Volumes for Compatible Software for IBM® FlashCopy® SE
•
Volumes for Mainframe Fibre Data Migration
Workflow for CFL-based spreadsheets in LUN Manager 31