HP XP Racks - Manual (Page 105)

If an upgrade installation or re-installation fails, perform a new
installation, and then re-execute setup to reflect the settings that have
been backed up.
¢
Save the HDLM environment settings information.
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys > any-file-
name
Make sure that the license has not expired.
¢
Save the HDLM execution environment ODM settings.
# /usr/DynamicLinkManager/bin/dlmodmset -o > any-file-name
Reconfigure the HDLM device. If HDLM devices and virtual target devices
are mapped on the virtual I/O server, go to step 3. If HDLM devices are
not mapped as virtual target devices on the virtual I/O server, and if you
want to automatically perform processes required for the reconfiguration,
such as unmounting the file system and changing the volume group
statuses, go to step 9. To manually perform these processes, go to step
10.
3
.
Terminate the processes of all applications that access the hdisks
connected to HDLM devices in the client logical partition.
4
.
If file systems are mounted on the hdisks connected to HDLM devices in
the client logical partition, unmount the file systems.
# umount file-system-mount-point
5
.
Execute the following command for the client logical partition to display
all the activated volume groups.
# lsvg -o
6
.
From the displayed list of volume groups, inactivate the volume groups
used by the hdisks connected to HDLM devices.
# varyoffvg volume-group-name
7
.
To prevent inheritance of the existing hdisk configuration, delete the
hdisks.
8
.
On the virtual I/O server, remove the mapping between HDLM devices
and virtual target devices.
To inherit the hdisk configuration of the virtual I/O client, inherit the
mapping between virtual target devices and HDLM devices.
¢
To inherit the mapping between virtual target devices and HDLM
devices:
$ rmdev -dev virtual-target-device-name -ucfg
¢
To prevent inheritance of the mapping between virtual target devices
and HDLM devices:
$ rmdev -dev virtual-target-device-name
9
.
Execute the utility for removing HDLM devices (dlmrmdev) with the -A
parameter specified.
Creating an HDLM Environment
3-39
Hitachi Dynamic Link Manager (for AIX) User Guide