HP XP Racks - Manual (Page 99)

Store the license key file directly under the /var/tmp/ directory by
using the hdlm_license name.
/var/tmp/hdlm_license
Note that the hdlm_license and dlm.lic_key files are deleted after
installation finishes successfully.
10
.
Execute the following command:
¢
When installing HDLM from the DVD-ROM
# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXgd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
¢
When installing HDLM from the directory to which the DVD-ROM was
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXgd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If the KAPL09172-E message is displayed, the hdisk for the device that is
managed by HDLM still remains. Re-execute the procedure starting from
step 6.
During installation, the KAPL09241-W message might be output. In this
case, installation of HDLM continues, but installation of HDLM components
has failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.
11
.
Execute the following command to make sure that the package is
installed.
# lslpp -la DLManager.mpio.rte
Make sure that the fileset item in the output listing contains
DLManager.mpio.rte, and all the displayed statuses are COMMITTED.
If one or more of the displayed statuses are BROKEN, remove and then re-
install HDLM.
12
.
Unmount the DVD-ROM.
# umount /cdrom
13
.
Delete the created mount directory.
# rm -r /cdrom
14
.
If a single-path configuration is used, connect cables to all HBAs to
change the configuration to a multi-path configuration.
Note that, regardless of the configuration, do not execute the cfgmgr
command.
15
.
Execute the following command to restart the host:
# shutdown -Fr
Creating an HDLM Environment
3-33
Hitachi Dynamic Link Manager (for AIX) User Guide