HP XP Racks - Manual (Page 136)

# cp -rp /cdrom/HDLM_AIX /tmp/hdlm/
# cp -p /cdrom/installux.sh /tmp/hdlm/
If you copied the files on the DVD-ROM to your desired directory, proceed
to step 5.
3
.
If there is no directory for mounting the DVD-ROM, make the directory.
# mkdir /cdrom
cdrom is the desired directory name. Hereafter, cdrom is used for
purposes of explanation.
4
.
Mount the DVD-ROM.
# mount -r -v cdrfs /dev/cd0 /cdrom
The /dev/cd0 part depends on the system.
5
.
If you are using a copy of the installhdlm utility that you have placed in
a separate directory to install HDLM, make sure you copy the necessary
files from the /cdrom/HDLM_AIX/hdlmtool/instutil directory.
The necessary files to be copied from the /cdrom/HDLM_AIX/hdlmtool/
instutil directory are shown below:
¢
installhdlm
¢
installhdlm_analysis
¢
dlmrmdev
Also, these files need to be copied to the same directory to which the
installhdlm utility is copied.
For a new installation, proceed to step 7.
6
.
If you are upgrading or re-installing HDLM, back up the HDLM settings.
If an upgrade installation or re-installation fails, AIX automatically
removes HDLM, and the HDLM settings are deleted.
Perform this step so that a copy of the HDLM settings is available in this
case.
If an upgrade installation or re-installation fails, perform a new
installation, and then re-execute setup to reflect the settings that have
been backed up.
¢
Save the HDLM environment settings information.
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys > any-file-
name
Make sure that the license has not expired.
¢
Save the HDLM execution environment ODM settings.
# /usr/DynamicLinkManager/bin/dlmodmset -o > any-file-name
7
.
In the following cases, prepare the license key or the license key file:
¢
If you are installing HDLM for the first time
¢
If you are upgrading or re-installing HDLM after the licensing term has
expired
3-70
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for AIX) User Guide