HP XP Racks - Manual (Page 114)

hdisk2 Available 1S-08-00-10,0 16 Bit LVD SCSI Disk Drive
hdisk3 Defined 1H-08-02 Hitachi Disk Array (Fibre)
hdisk4 Defined 1H-08-02 Hitachi Disk Array (Fibre)
...
14
.
If the license has expired, prepare the license key or license key file.
If the license has not expired, proceed to step 15.
¢
When only the license key has been provided
Create the /var/DLM directory, and then, in this directory, create the
license key file (dlm.lic_key). The following shows an example when
the license key is 123456789ABCDEF:
# mkdir /var/DLM
# echo "123456789ABCDEF" > /var/DLM/dlm.lic_key
¢
When the license key file has been provided
Store the license key file directly under the /var/tmp/ directory by
using the hdlm_license name.
/var/tmp/hdlm_license
Note that the hdlm_license and dlm.lic_key files are deleted after
installation finishes successfully.
15
.
Insert the HDLM DVD-ROM into the DVD-ROM drive, and mount the DVD-
ROM..
If you install HDLM by using a directory to which the DVD-ROM is copied,
you do not have to perform this step.
16
.
For an upgrade installation, execute the following command:
¢
When installing HDLM from the DVD-ROM
# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXgd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
¢
When installing HDLM from the directory to which the DVD-ROM was
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXgd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If you execute the dlmrmdev utility without the -e parameter specified at
step 12 and then the KAPL09172-E message is displayed, the hdisk for the
device that is managed by HDLM still remains.
If you execute the dlmrmdev utility with the -e parameter specified at
step 12 and then the KAPL09172-E message is displayed, the hdisk for the
device that is managed by HDLM still remains, and its status is
Available. Re-execute the procedure in step 12.
If an upgrade installation ends with an error, HDLM might be removed. In
this case, proceed to step 19.
3-48
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for AIX) User Guide