HP XP Racks - Manual (Page 109)

or
# installp -aXgd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If you execute the dlmrmdev utility without the -e parameter specified at
step 9 or 13 and then the KAPL09048-E message is displayed, the hdisk
for the device that is managed by HDLM still remains.
If you execute the dlmrmdev utility with the -e parameter specified at
step 9 or 13 and then the KAPL09048-E message is displayed, the hdisk
for the device that is managed by HDLM still remains, and its status is
Available. Re-execute the procedure in step 3.
During installation, the KAPL09241-W message might be output. In this
case, installation of HDLM continues, but installation of HDLM components
has failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.
18
.
For a re-installation, execute the following command:
¢
When installing HDLM from the DVD-ROM
# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXFd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
¢
When installing HDLM from the directory to which the DVD-ROM was
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXFd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If you execute the dlmrmdev utility without the -e parameter specified at
step 9 or 13 and then the KAPL09048-E message is displayed, the hdisk
for the device that is managed by HDLM still remains.
If you execute the dlmrmdev utility with the -e parameter specified at
step 9 or 13 and then the KAPL09048-E message is displayed, the hdisk
for the device that is managed by HDLM still remains, and its status is
Available. Re-execute the procedure in step 9.
During installation, the KAPL09241-W message might be output. In this
case, installation of HDLM continues, but installation of HDLM components
has failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.
19
.
Execute the following command to make sure that the package is
installed.
# lslpp -la DLManager.mpio.rte
Make sure that the fileset item in the output listing contains
DLManager.mpio.rte, and all the displayed statuses are COMMITTED.
Creating an HDLM Environment
3-43
Hitachi Dynamic Link Manager (for AIX) User Guide