HP XP Racks - Manual (Page 201)

6
.
Execute the following command:
# diag
Note
For details on the operations after executing the diag command, see
the AIX documentation. Steps 7 to 14 below provide an example of
the execution procedure for AIX V6.1 (Technology Level 02).
7
.
From the displayed menu, choose Task Selection.
The Task Selection List window appears.
8
.
Choose Hot Plug Task.
The Hot Plug Task window appears.
9
.
Choose PCI Hot Plug Manager.
The PCI Hot Plug Manager window appears.
10
.
Select List PCI Hot Plug Slots to check the PCI slot to be replaced:
The shading indicates the PCI slot where the HBA is to be replaced.
11
.
Go back to the PCI Hot Plug Manager window, select Unconfigure a
Device, and enter in Device name the device that is to be replaced.
For the Unconfigure any Child Devices and KEEP definition in
database items, select yes.
12
.
Go back to the PCI Hot Plug Manager window, select Replace/Remove a
PCI Hot Plug Adapter.
Select the HBA to be replaced.
13
.
Select Replace in the input field.
14
.
When the following message is displayed, replace the HBA:
HDLM Operation
4-25
Hitachi Dynamic Link Manager (for AIX) User Guide