Performing an unattended installation of hdlm, Performing an unattended installation of hdlm -69 – HP XP Racks User Manual
Page 135
When performing an upgrade installation or re-installation of HDLM in a
boot disk environment:
Perform the procedure described in
When Installing HDLM in a Boot
of
Performing an Upgrade Installation
or Re-installation of HDLM on page 3-38
10
.
Execute the following command on the active host.
When the OS used in a PowerHA environment is AIX V6.1 TL06 or AIX
V7.1 with no TL:
# clusterconf -r hdiskxx
When the OS used in a PowerHA environment is AIX V6.1 TL07 or later or
AIX V7.1 TL01 or later:
# clctrl -start -m node-name
11
.
Execute the following command on the active host to start PowerHA.
# smitty cl_start
Performing an Unattended Installation of HDLM
This subsection explains how to install HDLM using the installhdlm utility.
The unused capacity required to execute the installhdlm utility is as
follows:
•
/tmp directory
100 KB
•
Any log output directory that can be specified by users (the default
directory is /var/tmp)
200 KB
When Installing HDLM in a Local Boot Disk Environment
To install HDLM in a local boot disk environment:
1
.
Log in to AIX as the root user.
If you are using a virtual I/O server, see the virtual I/O server
documentation to log in to AIX.
2
.
Insert the DVD-ROM.
If you are installing HDLM from a directory in which files on the DVD-ROM
are copied, make sure that the file organization has not been changed. If
the file organization has changed, the installhdlm utility might not
function correctly:
# mkdir /cdrom
# mount -r -v cdrfs /dev/cd0 /cdrom
# mkdir /tmp/hdlm
Creating an HDLM Environment
3-69
Hitachi Dynamic Link Manager (for AIX) User Guide