HP XP Racks - Manual (Page 176)

/opt/hitachi/common/lib/D001
If the /opt/hitachi directory only contains the files and directories
shown above, delete the directory.
Note
¢
If the log output directory set in HNTRLib was not the default
directory, the log files will not be deleted during removal. In this case,
delete these files after removal.
¢
Even if you attempt to remove HNTRLib2 when HNTRLib is installed,
HNTRLib will not be removed. If no other programs are using
HNTRLib, delete it manually.
Canceling Cluster Software (PowerHA) Settings
When PowerHA is used, delete the custom disk method.
The following deletion procedure assumes that PowerHA 6.1 is used. The
actual screen transitions for the SMIT menu might be different depending on
the PowerHA version. Therefore, please also refer to the PowerHA
documentation.
To delete a custom disk method:
1
.
From the SMIT window, display the Configure Custom Disk Methods
window.
To display this window, choose the following sequence of menu items:
Communications Applications and Services, HACMP for AIX,
Extended Configuration, Extended Resource Configuration, HACMP
Extended Resources Configuration, Configure Custom Disk
Methods, and finally choose Remove Custom Disk Methods.
2
.
In the Select Custom Disk Methods window, select the following item(s),
and then delete it.
¢
When XP series is used
disk/fcp/HP
¢
When Thunder 9500V series, Lightning 9900V series (excluding XP
series), Hitachi USP series (excluding XP series), Universal Storage
Platform V/VM series (excluding XP20000 and XP24000), Hitachi
Virtual Storage Platform, VSP G1000, Hitachi
AMS2000/AMS/WMS/SMS series, HUS100 series, or HUS VM is used
disk/fcp/Hitachi
3-110
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for AIX) User Guide