HP XP Racks - Manual (Page 234)

set (Sets Up the Operating Environment)
The dlnkmgr command's set operation sets the HDLM operating
environment.
Format
To Set Up the HDLM Operating Environment
/usr/DynamicLinkManager/bin/dlnkmgr set
{-lb {on [-lbtype {rr|exrr|lio|exlio|lbk|exlbk}]|off}
|-ellv error-log-collection-level
|-elfs error-log-file-size
|-elfn number-of-error-log-files
|-systflv trace-level
|-systfs trace-file-size
|-systfn number-of-trace-files
|-pchk {on [-intvl checking-interval]|off}
|-afb {on [-intvl checking-interval]|off}
|-iem { on [-intvl error-monitoring-interval]
[-iemnum number-of-times-error-is-to-occur] | off }
|-lic
|-audlog {on [-audlv audit-log-data-collection-level] [-category
[[ss] [a] [ca]|all]]|off}
|-audfac facility-value
|-lbpathusetimes number-of-path-use-times
|-expathusetimes number-of-path-use-times
|-dpc {on|off} [-pathid path-ID -lu|-pathid path-ID -storage]
|-dpcintvl checking-interval
|-pstv {on|off}
}
[-s]
To Display the Format of the Set Operation
/usr/DynamicLinkManager/bin/dlnkmgr set -help
Parameters
To Set Up the HDLM Operating Environment
The table below shows the defaults and recommended values for each
setting. If you change the value of the set operation, the new value takes
effect immediately.
6-18
Command Reference
Hitachi Dynamic Link Manager (for AIX) User Guide