HP XP Racks - Manual (Page 292)

Use this parameter to display the add operation format.
Example
# /usr/DynamicLinkManager/bin/dlnkmgr add -help
add:
Format
dlnkmgr add -path [-s]
KAPL01001-I The HDLM command completed normally. Operation name
= add, completion time = yyyy/mm/dd hh:mm:ss
#
delete (Deletes a Path Dynamically)
The dlnkmgr command's delete operation batch-deletes paths whose
statuses are Offline(C) from the HDLM-management targets. You can
execute this command dynamically without any effects on existing paths.
Format
To Delete a Path Dynamically
/usr/DynamicLinkManager/bin/dlnkmgr delete -path [-s]
To Display the Format of the delete Operation
/usr/DynamicLinkManager/bin/dlnkmgr delete -help
Parameters
To Delete a Path Dynamically
-path
Indicates that the target of the operation is a path managed by HDLM.
Example
# /usr/DynamicLinkManager/bin/dlnkmgr delete -path
KAPL01161-I This operation will change the path configuration.
Do you want to continue? [y/n]:y
KAPL01165-I A path was deleted. (path ID = = 00010, storage =
HITACHI.HUS100.9100163, iLU = 0030)
:
KAPL01164-I Paths were deleted. (number of paths deleted = 2,
completion time = yyyy/mm/dd hh:mm:ss)
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message: for
6-76
Command Reference
Hitachi Dynamic Link Manager (for AIX) User Guide