HP XP Racks - Manual (Page 307)

Output directory #1 Files Explanation
/var/adm/csd vsd.log VSD execution log
var/adm/ras boot.log OS boot log file
emgr.log Log file for the emgr command
#1
An output directory is created in the specified directory when you open
the getras.tar.Z file.
#2
In the actual file name, a file number is appended to Trace-file-prefix
specified-in-the-Hitachi-Network-Objectplaza-Trace-Library-utility2. For
example, the default will be hntr21.log to hntr216.log. Note that the
number 2 following the integrated trace file prefix does not represent a
file number.
dlmchpdattr Utility for Changing HDLM Default Settings
This utility changes the default value for the hdisk attribute.
By changing the default value, the attribute value set for an hdisk can be
changed in the following cases:
• When a new hdisk is configured.
• When the chdev command is used to set as defined, and then
reconfigure, an existing individual hdisk for which the attribute value has
not changed.
• When deleting an existing hdisk # , and then reconfiguring it.
#
When an hdisk for which the attribute value has been defined is
reconfigured without being deleted, the set attribute value is carried over.
If the attribute value for individual hdisks needs to be changed, instead of
using this utility, execute the chdev command for the necessary hdisks.
Note that if the attribute value has been set for each hdisk, the set attribute
values will be applied.
Supplemental Information:
For HDLM 6.2, the default value for the hdisk reservation policy was set to
PR_exclusive. When the conditions listed in
Table 3-19 Reservation Policy
Settings on page 3-94 in About the Reservation Policy on page 3-94 are met,
to change the reservation policy to no_reserve, the chdev command had to
be executed for each hdisk.
Utility Reference
7-13
Hitachi Dynamic Link Manager (for AIX) User Guide