HP XP Racks - Manual (Page 323)

• When the error message KAPL09292-W was output during HDLM
installation.
Format
/usr/DynamicLinkManager/bin/dlmpremkcd {-c | -u | -h}
Parameters
-c
Adds information for HDLM backup to the OS backup setting.
-u
Deletes the HDLM-backup information from the OS backup setting, and
restore the setting to its original state.
-h
Displays the format of the dlmpremkcd utility.
Examples
In the following example, the utility adds information for HDLM backup to the
OS backup setting:
# /usr/DynamicLinkManager/bin/dlmpremkcd -c
KAPL13145-I The dlmpremkcd utility will be executed. Is this
OK? [y/n]:y
KAPL13141-I The dlmpremkcd utility completed successfully.
In the following example, the utility deletes the HDLM-backup information
from the OS backup setting, and restore the setting to its original state:
# /usr/DynamicLinkManager/bin/dlmpremkcd -u
KAPL13145-I The dlmpremkcd utility will be executed. Is this
OK? [y/n]:y
KAPL13141-I The dlmpremkcd utility completed successfully.
In the following example, the utility displays Help:
# /usr/DynamicLinkManager/bin/dlmpremkcd –h
Usage : dlmpremkcd {-c | -u | -h}
dlmpreremove Utility for Executed Before Removing HDLM
This utility excludes the hdisk recognized as a boot disk from being an HDLM
management target. In a boot disk environment, before you remove HDLM
you must exclude the hdisk recognized as a boot disk from being an HDLM
management target.
Format
/usr/DynamicLinkManager/bin/dlmpreremove [-h | -s]
Utility Reference
7-29
Hitachi Dynamic Link Manager (for AIX) User Guide