HP XP Racks - Manual (Page 324)

Parameters
-h
Displays the format of the dlmpreremove utility.
-s
Executes the command without displaying the message asking for
confirmation of command execution from the user. Specify this parameter
if you want to skip the response to the confirmation message (for
example, when you want to execute the command in a shell script or
batch file).
Examples
In the following example, the utility is executed in a boot disk environment:
# /usr/DynamicLinkManager/bin/dlmpreremove -s
KAPL13103-I HDLM can be removed after rebooting the host.
KAPL13101-I The dlmpreremove utility completed successfully.
In the following example, the utility displays Help:
# /usr/DynamicLinkManager/bin/dlmpreremove -h
Usage : dlmpreremove [-h | -s]
dlmrmdev Utility for Deleting HDLM Drivers
This utility deletes hdisks or changes the status of hdisks to Defined
according to the parameter settings. When all the hdisks recognized as HDLM
management-target devices have been successfully deleted or changed to
Defined, the HDLM manager stops.
Note that the hdisk recognized as a boot disk will not be deleted or changed
to Defined.
Format
/usr/DynamicLinkManager/bin/dlmrmdev [[-e | -f] [-A [-s]] | -h]
Parameters
-e
Changes the status of hdisks recognized as HDLM-managed devices to
Defined.
-f
Deletes all hdisks recognized as devices that are either managed by HDLM
or intended to be managed by HDLM.
-A
7-30
Utility Reference
Hitachi Dynamic Link Manager (for AIX) User Guide