HP XP Racks - Manual (Page 67)

3
Creating an HDLM Environment
This chapter describes the procedures for creating an HDLM environment and
for canceling the setup.
Make sure that HDLM is installed and its functions have been set up. The
volume groups and cluster software programs must be set up appropriately
for your system environment.
Note that, in the required procedures and notes, there are differences
between HDLM version 5.8.1 or earlier, and HDLM version 5.9 or later. For
details, see Appendix B, Differences Between HDLM Version 5.9 or Later and
Version 5.8.1 or Earlier on page B-1 .
□
HDLM System Requirements
□ Flow for Creating an HDLM Environment
□ Types of HDLM Installation
□
Notes on Creating an HDLM Environment
□ Installing HDLM
□
Checking the Path Configuration
□ Setting up HDLM
□ Setting up Integrated Traces
□
About the Reservation Policy
□ Settings for Using PowerHA
□ Settings for Using GPFS
Creating an HDLM Environment
3-1
Hitachi Dynamic Link Manager (for AIX) User Guide