HP XP P9500 Storage - Manual (Page 132)

•
Correction access executes to the pool-VOL in the selected pool.
•
The format function for the free space of a pool is not operating.
The format function for the free space of a pool does not operate by default. When using the
format function for the free space of a pool, contact the HP Technical Support in order to
change the setting.
NOTE: Following are cases that the formatted pool capacity may decrease:
•
New pages are being allocated.
•
LDEV format is being performed on the pool-VOL.
•
Correction copy is being executed.
Viewing the progress of rebalancing the usage level among pool-VOLs
1. In the Storage Systems tree on the left pane of the top window, select Pool.
2. From the Pools table on the right, click the row of a pool you want to confirm the progress of
rebalancing the usage level among pool-VOLs.
3. Click More Actions to select View Pool Management Status.
The View Pool Management Status window appears.
Following are cases that the progress ratio may not increase:
•
The usage level is being rebalanced among the pool-VOLs in pools other than the selected
pool.
•
Tier relocation is performed.
Increasing pool capacity
Adding the pool-VOL to the pool created for Thin Provisioning or Smart Tiers increases the pool
capacity. The amount of pool capacity registered in the pool represents the pool capacity. You
need to check the pool free capacity to determine if additional pool capacity is required. You
cannot increase the pool capacity while it is being shrunk.
Notes on using Thin Provisioning
If Mixable is set to Enable, notes on adding the pool-VOL to the pool are as follows:
•
The internal volume, and the external volume whose Cache Mode is set to Disable cannot
coexist.
•
The external volume whose Cache Mode is set to Enable, and the external volume whose Cache
Mode is set to Disable cannot coexist.
If Mixable is set to Disable, notes on adding the pool-VOL to the pool as follows:
•
Pool-VOLs of different RAID levels cannot coexist.
•
The internal volume and external volume cannot coexist.
Notes on using Smart Tiers
•
When pool-VOLs with the available monitoring information are added in a pool, tier relocation
is performed. When pool-VOLs with no available monitoring information are added in a pool,
the page usage rate is averaged out in a tier.
•
When adding the pool-VOLs adds the Tier and the number of the tier exceeds 3, the pool-VOLs
cannot be added:
132 Configuring thin provisioning