HP XP P9500 Storage - Manual (Page 91)

◦ Uncompleted (n% relocated): The tier relocation is suspended at the indicated percentage
progression.
◦ -: The pool is not a Smart Tiers or Smart Tiers Z pool.
•
Relocation Priority on (page 282) and (page 327) .
Displays the relocation priority.
◦ Prioritized: The priority is set to V-VOL.
◦ Blank: The priority is not set to V-VOL.
◦ -: V-VOL is not the Smart Tiers V-VOL or the tier relocation function is disabled.
•
Performance Graph on (page 318) .
The performance graph for the available monitor information is displayed in the View Tier
Properties window.
Execution modes when using RAID Manager
Manual execution mode
In Manual execution mode, you can manually collect monitoring data and relocate a tier. You can
execute commands to do the following:
1.
Start monitoring.
2. Stop monitoring.
3. Perform tier relocation.
The following illustrates tier relocation processing when in Manual execution mode:
Notes on performing monitoring
•
You can collect the monitoring data even while performing the relocation.
•
After stopping the monitoring, the tier range is automatically calculated.
•
The latest available monitoring information, which is collected just before the relocation is
performed, is used for the relocation processing.
•
When the relocation is performed, the status of the monitor information must be valid.
Smart Tiers 91