HP XP P9500 Storage - Manual (Page 297)

Description Item
Set the Drive Type/ RPM to be used for the LDEV for the selected pool. If not set,
Any appears. Drive Type/RPM
Set the RAID level for the selected pool. If not set, Any appears. RAID Level
This setting is not available for Snapshot pools.
Opens the Select Pool VOLs window. Select Pool VOLs button
Total number of the pool-VOLs selected for this pool. Total Selected Pool Volumes
Total capacity of the pool-VOLs selected for this pool. Total Selected Capacity
CAUTION: When you create the Thin Provisioning pool, if you specify Any for RAID level to
display the Select Pool VOLs window, external volumes with the cache mode set to disabled are
not displayed in the Available Pool Volumes table because they cannot coexist with volumes of
the other RAID levels:
When you select these volumes in the Select Pool VOLs window, specify a hyphen (-) for RAID level.
Confirm window
Confirm proposed settings, name the task, and then click Apply. The task will be added to the
execution queue.
Expand Pool wizard 297