HP XP P9500 Storage - Manual (Page 138)

5. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Increasing THP V-VOL capacity
1. In the Remote Web Console main window, in the Storage Systems tree, select Pool.
The pool name appears below Pool.
2. Select the pool associated with the THP V-VOLs whose capacity is increased.
The pool information appears on the right.
3. Click the Virtual Volumes tab.
4. From the Virtual Volumes table, select the THP V-VOL for which you want to increase capacity.
Select multiple THP V-VOLs using the Shift key (if the THP V-VOLs are adjacent), or using the
Ctrl key (if the THP V-VOLs are not adjacent).
5. Click Expand V-VOLs.
The Expand V-VOLs window opens.
6. In Capacity, type the capacity amount.
You can enter the LDEV capacity to two decimal places within the range of values indicated
below the text box.
7. Click Finish.
The Confirm window opens.
8. In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Changing the name of a THP V-VOL
1. In the Remote Web Console main window, in the Storage Systems tree, select Logical Devices.
The following shows another way to select LDEVs.
1. In the Remote Web Console main window, in the Storage Systems tree, select Pool.
The pool name appears below Pool.
2. Select the pool associated with the THP V-VOL for which you want to change the name.
3. Select the Virtual Volumes tab.
2. From the table, select the THP V-VOL for which you want to change the name.
Select multiple THP V-VOLs using the Shift key (if the THP V-VOLs are adjacent), or using the
Ctrl key (if the THP V-VOLs are not adjacent).
3. Click Edit LDEVs.
When you selected THP V-VOLs from the Virtual Volumes table, click More Actions, and then
Edit LDEVs.
The Edit LDEVs window opens.
4. Check LDEV Name and change the LDEV name, if necessary.
1. In Prefix, type the characters that will become the fixed characters for the beginning of
the LDEV name. The characters are case-sensitive.
2. In Initial Number, type the initial number that will follow the prefix name.
5. Click Finish.
138 Configuring thin provisioning