HP XP P9500 Storage - Manual (Page 350)

Description Item
Displays the attribute of the LDEV. Attribute
• Command Device: Command device.
•
Remote Command Device: Remote command device.
• Reserved VOL: Reserved volume.
•
TSE: TSE-VOL.
• Nondisruptive Migration: Volume for the nondisruptive migration.
•
-: Volume in which the attribute is not defined.
Number of assigned LUNs for the relevant LDEV. LUN ID ((number of LUNs) Sets of
Paths)
Name of the port and the host group of the assigned LUNs. Assigned LUN
IDs also appear. port ID / host group name
Create Host Groups wizard
Create Host Groups window
Description Item
Enter the name of the host group. Host Group Name
As a host group name, you can use single-byte ASCII characters
(alphanumeric characters and symbols) up to 64 characters. You cannot
use the following symbols: \ / : , ; * ? " < > |
You cannot use blanks at the beginning or end of the host group name.
Select the resource group in which the host group is created. If Any is
selected, among all ports being allocated to the user, ports where the host Resource Group Name (ID)
group can be add are available in the Available Ports table. If other than
Any is selected, among ports assigned to the selected resource group, ports
where the host group can be add are available in the Available Ports table.
350 LUN Manager GUI reference