HP XP P9500 Storage - Manual (Page 187)

Deleting a host group
Use LUN Manager to delete a host group.
If host group 0 (zero) is deleted, all WWNs that belong to host group 0 are deleted and all LU
paths that correspond to host group 0 are deleted. The host mode of host group 0 becomes
Standard, and the host group name is initialized. To remove all the WWNs and LU paths from
host group 0, you must initialize host group 0. For details, see
“Initializing host group 0” (page
186) .
Procedure 33 To delete a host group
1. Click Ports/Host Groups in the Storage Systems tree.
The list of available ports appear in the tree.
2. Select the Host Groups tab, or select a port from the tree and then select the Host Groups tab.
3. Select a host group that you want to delete.
4. Select Delete Host Groups.
5. In the Delete Host Groups window, confirm the settings, in Task Name type a unique name
for this task or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
Managing hosts 187