HP XP P9500 Storage - Manual (Page 291)

Description Item
Displays the total number of the selected pool-VOLs. Total Selected Pool Volumes
Displays the total capacity of the selected pool-VOLs. Total Selected Capacity
Set the pool name. *Pool Name
•
Prefix: Enter the alphanumeric characters, which are fixed characters of the
head of the pool name. The characters are case-sensitive.
•
Initial Number: Enter the initial number following the prefix name, which can
be entered up to 9 digits.
•
You can enter up to 32 characters including the initial number.
The smallest available number is entered in the text box as a default. No number
appears in the text box if no available pool ID exists. Initial Pool ID
If you specify the pool ID which is used already, the minimum pool ID after that
the specified pool ID is automatically set.
Set the subscription limit of the pool from 0 to 65534 (%). Subscription Limit
If this is blank, the subscription is set to unlimited.
When creating a Snapshot pool, this setting is not necessary.
Set the threshold between 1 and 100%. The default value is 70%. Warning Threshold
For Snapshot: Set the threshold between 20% and 95%. The default value is
80%.
Set the threshold between 1% and 100%. The default value is 80%. Depletion Threshold
When creating a Snapshot pool, this setting is not necessary.
Select Auto or Manual of performance monitoring and tier relocation. Tier Management
•
Cycle Time
Select the cycle of performance monitoring and tier relocation.
• Monitoring Period
When 24 Hours is selected in the Cycle Time list, specify the time zone from
00:00 to 23:59 (default value), in which performance monitoring is to be
performed. Take one or more hours between the starting time and the ending
time. If you specify the starting time later than the ending time, the performance
monitoring continues until the time when you specify as the ending time on
the next day.
This function can be set when the Multi-Tier Pool is enabled.
Specifies the monitoring mode, If you perform the tier relocation weighted to the
past period monitoring result, select Continuous Mode. If you perform the tier Monitoring Mode
relocation on the specified cycle, select Period Mode. You can specify this
function when the Multi-Tier Pool is enabled.
You can set this function when the Multi-Tier Pool is enabled. Buffer Space for New page
assignment
Tier 1: Enter an integer value from 0 to 50 as the percentage (%) to set for tier
1. A default value depends on the hard disk drive type of pool-VOL in tier 1.
The default value of SSD is 0%. The default value other than SSD is 8%.
Tier 2: Enter an integer value from 0 to 50 as the percentage (%) to set for tier
2. A default value depends on the hard disk drive type of pool-VOL in tier 2.
Tier 3: Enter an integer value from 0 to 50 as the percentage (%) to set for tier
3. A default value depends on the hard disk drive type of pool-VOL in tier 3.
You can set this function when the Multi-Tier Pool is enabled. Buffer Space for Tier relocation
Tier 1: Enter an integer value from 2 to 40 as the percentage (%) to set for tier
1. A default value is 2%.
Tier 2: Enter an integer value from 2 to 40 as the percentage (%) to set for tier
2. A default value is 2%.
Create Pools wizard 291