Innovate Motorsports LogWorks 3 - Manual (Page 133)

LogWorks3_Manual_1.01.doc - 133 -
Here’s the complete pressure unit family as stored in the Conversions.txt file:
PSI > kPa = ou * 6.8947573
PSIa > kPa = ou * 6.8947573
PSIg > kPa = (ou * 6.8947573) + ATMP
kg/cm^2 > kPa = ou * 98.0665
bar > kPa = ou * 100
inHga > kPa = ou * 3.3863887
inHgVac > kPa = ATMP - (ou * 3.3863887 )
millibar > kPa = ou * 0.1
mb > kPa = ou * 0.1
kPa > PSI = ou / 6.8947573
kPa > PSIa = ou / 6.8947573
kPa > PSIg = (ou - ATMP) / 6.8947573
kPa > kg/cm^2 = ou / 98.0665
kPa > bar = ou / 100
kPa > inHga = ou / 3.3863887
kPa > inHgVac = ( ATMP - ou) / 3.3863887
kPa > millibar = ou * 10
kPa > mb = ou * 10
As you can see, the first half of the conversions all convert a source unit to kPa. The second half
of the conversions convert kPa to another target unit.
The following master units are used in the Conversions.txt file:
Temperatures in degree Kelvin (degK)
Pressures in kiloPascal (kPa)
Acceleration in g
Speed in meters per second (m/sec)
Weight (mass) in kilograms (kg)
Length in meters (m)
Volumes in liters (l)
Power in kiloWatt (kW)
Torque in Newton-meters (Nm)
Frequency in Hertz (Hz)
Density in kilograms per cubic meter (kg/m^3)