Innovate Motorsports LogWorks 3 - Manual (Page 64)

LogWorks3_Manual_1.01.doc - 64 -
Or click on the measurement Item in the measurement pane (5) for that channel.
The channel whose marker lines are shown is identified in the measurement pane (5) in angled
brackets like in [14.72 AFR].
To move the marker lines click and drag the marker line handles. While the left mouse button is
down on the marker line handles, the exact measurement position of the marker lines and their
distance is shown.
To remove the marker lines:
Select
Tools->Marker Lines->Hide Marker Lines
Or click on an area on the measurement pane that’s empty (not showing a measurement),
7.3 Manipulating channel traces
7.3.1 The scale pane
The scale pane (3) shows the scales of all visible value channels. If the scale pane is too narrow
to show all you can scroll it left and right with the Hand Tool or the scrollbar at the bottom of
the pane.
The vertical grid in the graph pane (horizontal lines) reflects the scale of the trace next to the
graph pane.
To move a channel scale next to the graph, either use:
Channels->Set Grid To->Channel Name
Or right-click on the channel scale in the scale pane. A popup menu will show up that allows you
to move the scale next to the graph and set the grid to that channel.
Channel Grouping
If multiple channels have:
a. The same unit
b. The same range
c. The same Zoom in magnification and vertical scroll position
The scale pane will show only one scale for all those channels by grouping them. This is also
reflected in the name shown next to the scale.
If a channel would belong to a group, but has a different Zoom in magnification or vertical scroll
position, you can force it’s Zoom in magnification and vertical scroll position to be the same as the
rest of the channels in the group by right-clicking on the channel scale and selecting in the popup
menu: Group with others of kind