Innovate Motorsports LogWorks 3 - Manual (Page 76)

LogWorks3_Manual_1.01.doc - 76 -
Using the overlay scroll tool in the Log Window toolbar you can move the overlay left and
right. If a measurement marker overlaps an overlay trace, the overlay measurements at this point
are shown in brackets () and italic. The hand tool or horizontal scroll bar moves underlying
graph and overlay together. Overlays are not saved with a log.
To remove the overlay
Use
Edit->Remove Overlay
Or the keyboard shortcut Alt-O
7.6 Saving, exporting and Printing
To save a log use:
File->Save… (keyboard shortcut Ctrl-S) or
File->Save As…
You can also save the currently viewed session into a separate log file with:
File->Save current session only…
7.6.1 Exporting to different file formats
Logs can be exported in the following formats:
• Data Interchange Format .dif
This format can be read by many spreadsheet programs. LogWorks can also open logs
saved in .dif format.
•
Comma delimited Text .csv
This format is used by many other logging programs. It can also be loaded by many
spreadsheet programs.
•
Bosch MDF Format .mdf
This format is used by Bosch and ETAS data analyzing software. When saving in this
format the individual sessions of a log (if the whole log is exported) are saved as
individual files.
Individual Sessions can also be exported in tab delimited text format (.txt):