Innovate Motorsports LogWorks 3 - Manual (Page 62)

LogWorks3_Manual_1.01.doc - 62 -
•
To scroll one measuring period (0.08192 seconds) to the right (later time) press the
Right Arrow key on you keyboard.
•
To scroll one measuring period (0.08192 seconds) to the left (earlier time) press the Left
Arrow key on you keyboard.
Scrolling while real time Logging
During a real time log the graph pane will scroll automatically to show the most recent data.
When scrolling back during a real time log to review a recent event, the autoscrolling will stop to
allow examination of the data. Recording will continue even though the autoscrolling is
suspended.
To restart the auto scrolling just scroll to the end of the current recording session (for example
with the END key) so the real time data is visible again.
7.2.4 Zooming in and out in the Time Scale
To Zoom in (Magnify) the time scale select the Zoom In Tool in the toolbar.
Then click on the time scale (7) on the time range you want to zoom in on. The point (time) where
you clicked will stay on the same place in the scale, but the time will be expanded to the left and
right of the click point.
To Zoom out (Reduce) the time scale select the Zoom Out Tool in the toolbar.
Then click on the time scale (7) on the time range you want to zoom out from. The point (time)
where you clicked will stay on the same place in the scale, but the time will be reduced to the left
and right of the click point.
Holding down the Ctrl-Key when the Zoom In or Zoom Out Tool is selected,
changes its function. The Zoom In Tool becomes a Zoom Out Tool and vice versa.
7.2.5 Measuring
The whole point of data logging is measuring. LogWorks provides various tools for that.
Just moving the cursor over the graph pane (6) will update the Measurements in the
Measurement Pane (5) to reflect all values of all value channels at the point in time where the
cursor position is.
You can also Set Measurement Markers (10) in the Session. A Measurement Marker shows all
the measurements of all value channels at the point in time where the Measurement Marker is
inserted.