Innovate Motorsports LogWorks 3 - Manual (Page 40)

LogWorks3_Manual_1.01.doc - 40 -
5 LogWorks Gauges
LogWorks uses gauges similar to what you find on a cars dash to indicate the current value and
state of a channel.
Gauges can be added and removed any time. Multiple gauges can be assigned to the same
channel and some gauges can also display multiple channels.
Any aspect of the gauges like colors, size, type and position is user selectable.
To add a gauge, select in the main dash menu:
Gauges->Add new Gauge,
Or in the Main Dash Window toolbar, click
5.1 Anatomy of a LogWorks gauge
A gauge in LogWorks has:
1. A face.
2. A scale. The scale range is the range of the displayed channel, divided into convenient
divisions.
3. A needle
4. Unit and multiplier. The multiplier, like x 1000 in the unit part allows the scale to use
smaller numbers. The unit text is omitted if the unit and the channel name are the same.
5. A channel name.
6. A numeric display. This shows the current channel value numerically.
7. A redline area (optional). This is a warning area.
8. A bezel. This is also optional and for optical purposes only