Innovate Motorsports LogWorks 3 - Manual (Page 43)

LogWorks3_Manual_1.01.doc - 43 -
You can drag the gauge anywhere in the window. You can change its size by dragging one of the
rectangular corner “handles” in the gauge outline.
To select multiple gauges, hold down the Ctrl key while selecting more gauges. The first gauge
you clicked will be the anchor gauge with yellow handles. More on that later.
To de-select all gauges, click outside a gauge in the window.
Another way to select multiple gauges is to click outside a gauge and drag with the mouse. A
rectangle will be drawn on the gauge background. When the mouse button is released, all gauges
whose center is within the rectangle, will be selected.
5.3.2 Adding and editing gauges
To add a gauge, select in the main dash menu:
Gauges->Add new Gauge
Or in the toolbar, click
To change the gauge type, channel, redline area and so on of an existing gauge either:
Double-click on the gauge,
Or click on the gauge and select in the Dash Window Menu:
Gauges->Edit gauge.
In either case the following dialog box will show: