Innovate Motorsports LogWorks 3 - Manual (Page 79)

LogWorks3_Manual_1.01.doc - 79 -
The gauges in the playback window can be manipulated the same way as described in chapter 3.
The position, type, number and channel assignment of the gauges and of the playback window is
saved in the log file when log file is saved.
The current gauge skin selected in the Main Dash is also applied to a playback window,
independent of the skin the log was originally saved in.
When opening a playback window the first time, the position, type, number and channel
assignment of the gauges in the current Main Dash active during the time the log was saved or
created is applied.
With this window you can play, single-step forward and back and loop on an area. You can also
change the playback speed. If areas in a session are selected, only the selected areas are
played. When playing back while a 3D chart/graph is open (see chapter xxx) the play position is
also indicated in the chart/graph.
7.7.2 Statistics Views
Open a statistics window with the Log Menu item:
View->Statistics->Channel Name
This submenu opens a statistics window for the selected input. A statistics window looks like this: