JKS 2210 - Manual (Page 5)

JKS2210 JKS Adjustable Coil Spacer Installation Page 5
ATTENTION INSTALLER
IMPORTANT NOTE REGARDING
SHOCK ABSORBERS
To prevent the coil springs from becoming
unseated during maximum suspension
extension, correct length shock absorbers
must be installed.
Operation
Ride Height Adjustments
Future ride height adjustments should be made
with
NO LOAD on the front coil springs, and the suspen-
sion at FULL DROOP.
NEVER TURN Adjuster Ring (B) while under tension
and
ALWAYS APPLY SPRAY LUBRICANT to Threaded
Tube (A) before adjusting.
Maintenance
Regular cleaning with pressurized water is recommended
to maximize ease of operation and reliability.
In addition, the Bump Stop Adapter (E) has two 1/8” drain-
age holes that evacuate any water collected inside the
upper spring retainer. Periodically check for blockages and
clear the drainage holes if necessary.
©2014 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 5/15/2014