JKS OGS122 - Manual

JKSOGS122 JKS Adjustable Trackbar Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable Track Bar
Part Number: JKSOGS122
Applications: Wrangler JK RHD, 2007-14
Welcome
CONGRATULATIONS on purchasing a new Adjust-
able Trackbar from JKS Manufacturing. We are com-
mitted to providing you with the best products avail-
able and your satisfaction is our first priority.
PLEASE READ these Installation Instructions careful-
ly, and save them for future reference, as they contain
important installation and maintenance information.
Important
NOT COMPATIBLE WITH frame-mounted track bar
drop brackets.
CHECK TORQUE SPECIFICATIONS regularly.
Tools Required
 Hydraulic Floor Jack & Jack Stands
 Metric/Standard Socket Wrench Set
 Torque Wrench
 1-7/8” Open-End Wrench
 Tape Measure
 Heavy Duty Ratchet Strap *
 Anti-Seize Lubricant
 Factory Service Manual (recommended)
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description QTY
A Male Threaded (Frame) End 1
B Female Threaded (Axle) End 1
C 1-1/4” NF Jam Nut 1
D Rubber Bushing 2
Installation
‰ 1. REMOVE FRONT TRACK BAR
 Remove the front track bar mounting hardware
from the axle and chassis brackets. Retain origi-
nal hardware.
 Remove original track bar from vehicle.
‰ 2. MOUNT ADJUSTABLE TRACKBAR TO
AXLE BRACKET
 Apply anti-seize lubricant to bolt threads of original
track bar mounting hardware.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036