JKS OGS122 - Manual (Page 3)

JKSOGS122 JKS Adjustable Trackbar Installation Page 3
IMPORTANT: The front axle housing must be in
perfect lateral alignment with vehicle chassis be-
fore you proceed with installation.
 Once all adjustments are complete, fully tighten
the Jam Nut (C).
 Using a torque wrench, tighten mounting hardware
at both ends of track bar to 125 ft-lbs.
 A professional steering alignment should be
performed to correct toe position and to ensure ve-
hicle meets proper alignment specifications.
Maintenance
Check torque specifications regularly.
Regular cleaning with pressurized water is recom-
mended to maximize reliability.
©2014 JKS Manufacturing, Inc & Aftermarketing, LLC
Revision Date 04/24/2014