JKS OGS155 - Manual

JKSOGS155 JKS Adjustable Trackbar Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable Trackbar
Part Number: JKSOGS155
Welcome
CONGRATULATIONS on purchasing a new Adjustable
Trackbar from JKS Manufacturing. We are committed to
providing you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
NOT COMPATIBLE WITH right hand drive vehicles.
CHECK TORQUE SPECIFICATIONS regularly.
Tools Required
 Metric/Standard Socket Wrench Set
 Torque Wrench
 Tape Measure
 1-1/2” Open-End Wrench
 Heavy Duty Ratchet Strap *
 Anti-Seize Lubricant
 Hydraulic Press *
 Wheel Bearing Grease
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description
A Male Threaded (Axle) End
B Female Threaded (Chassis) End
C 1” NF Jam Nut
D Sleeve
E Polyurethane Bushing
F Sleeve
G Polyurethane Bushing
H Polyurethane Bushing
I Polyurethane Bushing
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036