MagTek EC2000 99875607 - Manual (Page 100)

4 - Removal and Re-installation
ExpressCard 2000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 100
b) Make sure the ribbon information in the upper left corner matches the ribbon you are using. If it
doesn’t, set and calibrate the ribbon (see the ExpressCard 2000 User Installation and
Operation Manual for details).
c) Press the Print button. The EC2000 will create a test card with all characters and all font IDs.
d) Inspect the card to make sure the embosser is working as expected.
15) If the EC2000 does not power up or function properly, contact MagTek Support Services for
assistance (see Appendix A Technical Support).