5 - adjustments – MagTek EC2000 99875607 User Manual
Page 165
5 - Adjustments
ExpressCard 2000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 165
3) Under the “Indenter Move” button, select Bot Cartridge Unload in the dropdown list.
4) Press the
Indenter Move
button. The device will move the indenter to the unload position.
5) Look at the up-down position of the negative letters or numbers (removed ink) on the indenter ribbon.
They should be centered between the top edge and bottom edge of the ribbon.
6) If they are not centered:
a) Navigate to
Menu
>
Settings
>
Edit Config
to open the
Configuration Editing
password
page.
b) Enter password
1234567
and press the
E
button.
c) Enter password
7654321
and press the
E
button.
d) Scroll down in the list and select the number below the BotCardTridgeHomeToIndent item.