MagTek EC2000 99875607 - Manual (Page 107)

4 - Removal and Re-installation
ExpressCard 2000| Instant Issuance Card Personalization System | Hardware Service Manual
Page 107
13) Remove the tipper foil cartridge (see 99875600 ExpressCard 2000 User Installation and
Operation Manual for detailed instructions) and set it aside in a secure location, or offer it to the
customer for temporary storage or secure disposal.
14) Remove the cover by following the steps in section 4.4 How to Remove / Re-install the Cover.
15) Disconnect the tipper heater plug on the left side of the tipper module (see Figure 4-86).
Figure 4-86 - Tipper Heater Connector (TOP VIEW FROM FRONT)
16) Unplug the top motor connector on the left side of the tipper module (see Figure 4-87).