AT&T DEFINITY Remote Port Security Device - Manual (Page 58)

The fields of the List User Table screen are:
User ID Provides the user ID.
Blocked? States whether a Block command has been issued for that user. The default
is no block. If a user is not blocked, the field is left blank. Blocks can be
issued on both permanent and non-permanent users.
Permanent? Tells whether the user is one of the AT&T permanent users. If the user is
not permanent, the field is left blank.
Restrictions Provides the code letter for any time restrictions that have been placed on
the user. The default is no restrictions. Restrictions can be placed on both
permanent and non-permanent users. To find the meaning for the
restrictions codes, use the List Restrictions command, which is explained in
this section.
Second Sample Command and Response:
The following is a sample of the output returned by using the second syntax example, which lists
only specified users.
> 1 KEY20
User ID Blocked? Perm? Restriction(s)
KEY20 A
-- End of List --
The fields of this screen are explained in the first sample, above.
3-12 RPSD System Administration