AT&T DEFINITY Remote Port Security Device - Manual (Page 69)

LS - List Statistics
Syntax:
ls [ RETURN ]
The List Statistics command displays a statistical summary of call attempts and failures, both
cumulative and since the last time the statistical summary was reset. The summary is reset by the
administrator using the Reset Statistics command, described in this section.
Sample Command and Response:
> ls
---RPSD/Lock Access Attempt Statistics - Last Reset: 08/14/90
Since Last Reset Cumulative
Successful Authentications
Failed Attempts by Reason
(1) No RPSD/Key Detected
(2) No Response
(3) Invalid User ID
(4) Blocked User
(5) Invalid Response
(6) Outgoing Call
(7) Ring - No Answer
(8) Force Disconnect
(9) Restricted Time
19
1
0
0
1
1
3
1
2
2
142
1
0
0
2
1
14
1
3
1
The fields of the List Statistics screen are:
Last Reset Gives the date that the statistics kept in the Since Last Reset field were
reset to 0. Cumulative statistics are never reset to 0.
Successful Provides the number of times that a caller was successfully authenticated
Authentications by the Lock since the last time the statistics were reset and also
cumulatively since the Lock was installed.
Failed Attempts Provides the number of times that a caller failed in an access attempt for
by Reason each of the nine failure reasons. The statistics are broken down into the
number of failures since the last reset and also the cumulative total since
the Lock was installed. For a more detailed explanation of the causes of
failure, see Table 3-1.
RPSD System Administrator Command Set 3-23