AT&T DEFINITY Remote Port Security Device - Manual (Page 86)

W - Wipe Out
Syntax:
w [ RETURN ]
The Wipe Out command will erase the user ID, secret key information, and device ID of the
RPSD Key and return it to a virgin state. If the Wipe Out command is used, the Key will be
unable to access the RPSD Lock unless the entire initialization procedure is performed again.
For this reason, you should be certain that you really want to return the Key to a virgin state
before using this command.
You may wish to test the Key while it is in an uninitialized state. See Chapter 2, Testing an
Uninitialized Key for the procedure.
The RPSD Key requests confirmation of the Wipe Out command.
Sample Command and Response:
> w
★ ★ ★ ★
THIS FUNCTION RENDERS DEVICE UNABLE
★ ★ ★ ★
★ ★ ★ ★
TO ACCESS RPSD/LOCK
★ ★ ★ ★
Are You Sure You Want to Do This (Y/N) ? y
08/15/90 13:23:16 Wipe Out Complete
>
Help Screens
To obtain a help screen for any command, enter a question mark (?) followed by the command
and [ RETURN ].
Sample Help Request and Help Response:
> ?i
Command: I - ID Set
Function: Set ID to precede all log messages from this device.
Format: I log_id
Example: >I KEY-A
To clear ID type: I ""
RPSD Key User Command Set 4-11