AT&T DEFINITY Remote Port Security Device - Manual (Page 62)

LR - List Restrictions
[ RETURN ]
S y n t a x :
lr
or
lr <restr_id> [ RETURN ]
The List Restrictions command is used to list the time restrictions that have been administered.
Up to 14 separate restrictions maybe created (A-N).
The first syntax example above will list the time restrictions for all restriction IDs A to N. In the
second example, entering a letter for the specific restriction ID will yield the time restrictions for
that restriction ID only.
Sample Command and Response:
> lr
Restriction ID Start Time End Time Days of the Week
A 18:00 24:00 Sat, Sun
B 12:00 15:00 Sat, Sun
C 16:00 20:00 Mon
D 01:00 08:00 Mon, Tues, Wed, Thu, Fri
E 00:00 09:00 Thu
-- End of List --
>
The fields of the List Restrictions screen are:
Restriction ID The letter code from A to N to be used to assign a restriction or set of
restrictions to a user or users. To assign restrictions, see the
User Restrictions command in this section.
Start Time The time of day, in 24 hour clock format, when the restriction begins.
End Time The time of day, in 24 hour clock format, when the restriction ends.
Days of the Week The days on which the restricted times take effect.
3-16 RPSD System Administration