AT&T DEFINITY Remote Port Security Device - Manual (Page 65)

The fields of the Log History screen are:
Log ID provides the ID of the Lock associated with the system activity message.
Sequence numbers each message in sequence. The sequence goes from 000 to 999
Number and then restarts at 000.
Date provides the date of the message.
Time provides the time the message is generated in 24 hour clock format.
Message contains the status message.
In the example, KEY20 is a user ID. Where the user ID is followed by information in square
brackets, the information is the RPSD User ID number.
Additionally, calls may generate an alarm form of the status message. This type of message tells
you the reason for a call failure. Alarms are identified by a number from 1 to 9 in parentheses.
Table 3-1 describes these alarms.
RPSD System Administrator Command Set 3-19