AT&T DEFINITY Remote Port Security Device - Manual (Page 66)

AH - Access History
Syntax:
[ RETURN ]
ah
The Access History command displays details regarding the last twenty accesses of the RMATS
channel for both incoming and outgoing calls. The command takes no arguments.
Sample Command and Response:
> ah
---Access History ---
Date Time User ID Device # Duration
08/16/90 13:08:51 ATT-INADS1 12345 0: 0:20
08/16/90 13:09:42 ATT-INADS1 12345 1:20:33
08/16/90 15:12:06 <Outdial> 0: 5:08
08/16/90 15:20:51 <Outdial> 0: 2:14
08/16/90 15:24:19 ATT-INADS2 72333 0: 8:46
08/16/90 15:48:01 ATT-INADS2 72333 0: 1:59
08/16/90 15:58:23 KEY11 82545 0: 7:22
08/16/90 16:08:51 KEY11 82545 0: 3:20
08/17/90 08:08:18 <Outdial> 0: 9:49
08/17/90 08:28:13 ATT-INADS1 12345 0:28:11
08/17/90 08:58:37 ATT-INADS1 12345 0: 1:02
08/17/90 14:03:32 <Outdial> 0: 6:15
08/17/90 14:09:53 ATT-INADS1 12345 0: 3:38
08/17/90 14:18:10 KEY16 96549 0:24:22
08/17/90 14:44:44 KEY16 96549 0: 0:58
08/18/90 09:08:51 KEY12 37827 0:10:04
08/18/90 09:21:48 KEY12 37827 0: 0:47
08/18/90 11:31:25 <Outdial> 0:13:03
08/18/90 11:48:11 <Outdial> 0:29:34
08/18/90 13:28:31 ATT-INADS1 12345 2:56:05
>
The fields of the Access History screen are:
Date Date on which the access took place.
Time Time at which the access call came in.
Device #
Duration
User ID The user ID of the RPSD Key used to access the channel. If the call was
an outgoing call on the channel, no user ID is displayed but the call is
identified as
<Outdial> .
The device number of the RPSD Key used to access the channel. The
device number is a number assigned to the Key by the Key user at
initialization. No device number appears for an outgoing call.
The length of time that the call was corrected in hours, minutes,
and seconds.
3-20 RPSD System Administration